In Stock
Cleveland, Ohio

1985 Hunter 28.5 | 28ft

$18900
Well-maintained with new roller furling (2024), updated rigging, and refurbished interior. Sails in great shape—ready to sail away!
1985 Hunter 28.5 | 28ft

In great condition Hunter 28.5. Ready to sail away.

Sails in good shape – All less than 5 years old, Main, 1,2 and 3 jib, spinnaker (roller furling installed in 2024)

Winches Harken (6 years)

Refinished bottom with VC 17m paint, re-primed bottom in 2017

Refurbished interior – all teak lining,

New running rigging (less than 2 years old).

New forward hatch cover (installed in 2024)

New started installed fall 2024

Additional Description:

The Hunter 28.5 is rigged as a sloop with a split backstay and a B&R rig, which means that it has no backstay and uses swept-back spreaders to support the mast. The mast is deck-stepped and has a height of 12.6m (41.33 ft) above the waterline. The sail area is 36.9m² (397 sq ft), with a mainsail of 16m² (172 sq ft) and a genoa of 21m² (226 sq ft).

Hunter 28.5 Accommodation Layout

The boat is powered by an inboard diesel engine with a power of around 15 hp. The fuel tank has a capacity of 42 l (11 gal) and the water tank has a capacity of 102 l (27 gal).

The boat has a hull speed of 7.4 kn (8.5 mph) and a PHRF rating of around 180, which means that it is moderately fast and competitive in its class.

Accommodation
The Hunter 28.5 has a spacious and comfortable interior that can accommodate up to six people. The layout consists of:

  • A V-berth cabin forward with storage lockers and shelves.
  • A head compartment to port with a marine toilet, sink, shower, and storage.
  • A hanging locker to port aft of the head.
  • A saloon with a U-shaped dinette to port that converts into a double berth, and a settee to starboard that can be used as a single berth.
  • A navigation station to starboard aft of the settee with a chart table, electrical panel, and instruments.
  • A galley to port aft of the dinette with a two-burner stove, sink, icebox, and storage.
  • A private aft cabin to port with a double berth and storage.

The boat has plenty of natural light and ventilation from several opening ports and hatches. The cabin sole is made of teak and holly wood, which adds warmth and elegance to the interior.

Hull and Deck
The Hunter 28.5 has a fiberglass hull and deck with wood trim. The hull shape is round-bottomed with a raked stem and a reverse transom. The keel is either a fixed fin keel or an optional shoal draft wing keel, both made of lead. The rudder is an internally-mounted spade-type rudder that is controlled by a wheel in the cockpit.

The deck is wide and flat, with non-skid surfaces for safety and ease of movement. The cockpit is large and comfortable, with high coamings, cushioned seats, and storage lockers. The helm station has an instrument pod, engine controls, compass, and cup holders.

The deck hardware includes two self-tailing two-speed jib sheet winches, two halyard winches on the cabin top, traveler on the arch above the companionway, genoa tracks and cars on the side decks, bow pulpit, stern rail, stanchions, lifelines, anchor roller, anchor locker, cleats, chocks, handrails, swim ladder, etc.

ENGINE
Yanmar 2GM
ENGINE HOURS
1
CLASS
Cruiser/Racer
LENGTH
28.42ft